Thursday, October 6, 2011

Galley Planning, Part 5 The Working Environment

Now that you’ve decide on what to put in your galley, it’s time to place it in the most useful and convenient location. Not every item can be on the countertop or at arm’s reach. Some items may even be behind others or stored elsewhere in the aircraft.

The typical galley has three levels, upper, middle and lower. The upper are usually consists of storage areas for glassware and smaller items. They are usually enclosed with sliding doors because there is little head room for hinged doors that swing inboard. It is popular to enclose decorative glassware with acrylic doors and back lights that give a nice visual presentation.

The mid-galley area is typically at counter height and sets slightly outboard. This offset creates the working preparation area. This area becomes more critical than one may think. The reason being is that when meals are being plated, you may need this flat surface to place several plates when getting organized prior to serving. The mid area is also a very good spot for the coffee maker, liquor and snacks. It is best to enclose these areas in rolling tambour or sliding doors. A hinged doors swing means items on the counter will get in the way when you try to access these areas.

If there is a sink on the counter be sure it has a cover when it’s not being used an automated drain valve. It is also best not to plate the sink in gold as it will wear quickly, try to keep it in a stainless steel finish as the cover will be in place when passengers board.  

The lower galley is where the larger, deeper items will be housed. Such as ovens, microwaves, ice drawers, china, utilities, trash, food and beverage storage. In larger aircraft it is chillers, refrigerators, trash compactors and drawer style dishwashers will be placed. Each of these areas will have its own requirements for doors and lings. To minimize weight it is best to use as little laminate as possible, galley cavities should be painted. It is also very useful to implement pull-out work surfaces just below the counter to give additional space when needed.       

In your galley planning, remember the basics step in planning, consult you passengers, gain in-put form you cabin crew and work with you completion center. Keep quantities to the basic minimum and carry spear and rarely used items in a closet or baggage area. Select tasteful yet durable service ware that can be replaced and stacks and stores easy. You will be surprised how much can be packed into a small area that can create culinary perfection!

No comments:

Post a Comment